Shimada

After designing and producing Asia’s first 6 spindle Automatic, Shimada has become Japan’s leading manufacturer of cam-less CNC 6 & 8 Spindle Automatics and 2-Spindle Indexers. The Automatics can be configured with up to two CNC slides, bar-loaders capable of feeding up to 32mm stock, and numerous optional and customized features which can further reduce the cycle times of so many of today’s large quantity runs. By combining the justin tucker baltimore ravens Jersey accuracy of CNC and the ease of the cam-less operation, part set-up can usually be accomplished in less than three hours. The 2-Spindle Indexer offers the “load while machining” capability on a CNC lathe with 10” chucks, a geared headstock, and a robust, milling optional, twelve station turret. Twin Spindle Lathes6-Spindle Bar Machines6-Spindle Lathes8-Spindle Lathes The 2 SI-6/8 2-Spindle 1NC Lathe was developed from the architecture of “reducing idle time to the utmost limit.” Collet chuck, 6″, 8″, 10″, 12″ chucks Loading with one spindle while processing with the other. Chip to Chip time “2 seconds.” Spindle index time “0.9 seconds.” This design, with the chucking position outside the machine, leads to easy manual loading/unloading and chuck exchange Simultaneous processing of the front and back side of workpieces with one machine This lathe is optimal for the following types of work: Tasks that need a short cycle time and a long loading time Task with a short cycle time (work with a large loading time to cycle time ratio) Tasks with a big difference between the 1st and 2nd process cycle times Task that requires a large amount of time for chucking under manual loading condition 2SI-6/8 Twin Spindle CNC Lathe Model 2SI-6 2SI-8 2SI-10 2SI-10 12″ Chuck Turning Capability Max. Turning Diameter ?160mm (6″) ?200mm (8″) ?310mm (12″) ?310mm (12″) Max. Turning Length 120mm (5″) 120mm (5″) 200mm (5″) 200mm (5″) Spindle No. of Spindles 2 2 2 2 Chuck Capability 6″ 8″ 10″ 12″ Max. Spindle RPM 6000 3500 3000 3000 Motor 10/7.5kw 10/7.5kw 15/11kw 15/11kw Tool Holder Type of Tool Holder Turret Turret Turret Turret No. of Attachable Tools 8 or 12 8 or 12 8 or 12 8 or 12 X-Axis Stroke 120mm (5″) 120mm (5″) 170mm (7″) 170mm (7″) Z-Axis Stroke 170mm (7″) 170mm (7″) 225mm (9″) 225mm (9″) Rapid Feed Rate 20m/min (66′) 20m/min (66′) 15m/min (49′) 15m/min (49′) Control Unit FANUC FANUC FANUC FANUC Machine Size Floor to Spindle Center 960mm (38″) 960mm (38″) 1100mm (43″) 1100mm (43″) Machine Height 1800mm (71″) 1800mm (71″) 1700mm (70″) 1700mm (70″) Floor Space 1900×1600mm (75×63″) 1900×1600mm (75×63″) 2450×2200mm (96×87″) 2450×2200mm (96×87″) Machine Weight 3600kg (7937 lbs) 3800kg (8378 lbs) 5000kg (11,023 lbs) 5000kg (11,023 lbs) Product Request Form Name * First Last * Last Email * Telephone * Product of Interest * Message * Turning bar material is considered time- and space-consuming. Shimada challenges that belief with high-speed turning using 6 spindles. Turning is possible up to a maximum diameter of 16mm (.63″), 27mm (1.06″) and 32mm (1.26″) Three NC slides can be mounted Saves space, energy, and manpower Integrated spindle motors are available for spindle stopping and C-Axis positioning, as well as constant surface footage B6 Series Cam-Less 6-Spindle Automatic Bar Machine with Optional CNC Slides Model B6-16 B6-27 B6-32 ISM B6-27 with Integrated spindle motors Spindle No. of Spindles 6 6 6 6 Spindle Diameter 55 mm (2.2″) 70mm (2.8″) 70mm (2.8″) 80mm (3.15″) Max. Spindle Speed 5,000rpm 3,000rpm 3,000rpm 5,000rpm C axis Control N/A N/A N/A Standard Motor 11kw (14.7hp) 11kw (14.7hp) 11kw (14.7hp) 6kw (8.0hp) Numnber of Motors 1 1 1 6 Bar Capability Max. Bar Diameter...

read more