Metal Shears

National foot shears are designed for precise shearing through 16 gauge mild steel. This shear is also recommended for shearing aluminum, plasitic, copper, brass and lead. All steel side frames, all steel tables and cutter heads with four cutting edge high carbon, high chromium blades, back gauges, table gauges, spring actuated hold down, front arm extensions, bottom treadle safety stop and full three year warranty.

Product Request Form

If you are human, leave this field blank.

Name *

First

Last *

Last

Email *

Telephone *

Product of Interest *

Message *

reCAPTCHA

Air Shears

National offers three heavy duty air shears with steel side frames, all steel cutter heads and tables. These air shears are standard with four cutting edge high carbon high chromium blades, front arm extensions, table gauges, back gauges, and heavy duty foot switch.

Optional Accessories:

57″ Squaring arm

Model NSA 52

Product Request Form

If you are human, leave this field blank.

Name *

First

Last *

Last

Email *

Telephone *

Product of Interest *

Message *

reCAPTCHA

Hydraulic Shears

National heavy duty power shears are equipped with a fully integrated hydraulic unit. Complete with electrical hydraulic valve, pilot operated-pressure relief valve, heavy duty foot switch that allows this unit to return to the top of the stroke when the operator removes his foot from the foot switch. Heavy duty double acting cylinders. Fully enclosed control panel. Then National shear is actuated by a portable shrouded electric foot switch attached to a long flexible cables so it may be positioned comfortable to the operator. Steel side frames, all steel cutter heads and tables with solid 4-edge high carbon high chromium blades. Quick adjusting back gauge for direct reading with a positive lock. Standard with table gauges and front arm extensions.

Product Request Form

If you are human, leave this field blank.

Name *

First

Last *

Last

Email *

Telephone *

Product of Interest *

Message *

reCAPTCHA

1/4 Hydraulic Shears

National offers four powerful heavy duty precision hydraulic shears with all steel cutter heads and tables. Standard with hydraulic rubber inserted hold downs, quick adjusting back gauge for direct reading with a positive lock, front arm extensions, table gauges, heavy duty foot switch and well lighted work area. You receive a full three year warranty. The hydraulic unit conforms to J.I.C. standards featuring simplicity of design. The National hydraulic system is simple to maintain with standard replacement parts such as valves, cylinders, hoses and oil. The National shear is actuated by a portable shrouded electric foot switch attached to a long flexible cable so it may be positioned comfortable to the operator.

National Shears have high carbon, high chromium blades with four cutting edges of premium quality tool steel and will withstand nicking and wear better than relieved blades. National blades are secured to the shear with tempered flathead screws through countersunk holes in blades. Complete cuts of full width pieces are 2” longer than specified cutting length. The high strength steel side constructed side frames are made of the highest tensile strength metal needed for long life and accurate shearing. Under drive construction with downward cylinders and major hydraulics under the bed gives the shear a low profile.

Product Request Form

If you are human, leave this field blank.

Name *

First

Last *

Last

Email *

Telephone *

Product of Interest *

Message *

reCAPTCHA

Mechanical Shears

All USA made, rugged welded construction. Inch bed scales, accurate table side gauges. Hold down finger guard with non-marring urethane and positive spring actuation. High carbon high chrome long life tool steel blades. Upper and lower blades are interchangeable. Non-metallic gibbs, maintenance-free self-lubricating bearings. Continuous cycle, single cycle and jog for different needs. Fully guarded safety foot switch, low power consumption.

Product Request Form

If you are human, leave this field blank.

Name *

First

Last *

Last

Email *

Telephone *

Product of Interest *

Message *

reCAPTCHA

Bench Brakes

Simplicity of design allows these brakes to work in the most direct fashion. Easy to set up and operate. Body sections are welded steel plates, with heavy truss rods and braces for longer life and greater strength. These brakes are standard with extension handles, apron stop for repeat bends, and replaceable bushings at points of wear.

Product Request Form

If you are human, leave this field blank.

Name *

First

Last *

Last

Email *

Telephone *

Product of Interest *

Message *

reCAPTCHA

Box and Pan Brakes

National has four popular floor model box and pan brakes designed to be easy and simple to operate. Standard with 2″ x 3″ and 4″ finger widths, stop rods for repeat bends, two large counterweights, and precision bearings on the apron. All steel body construction with extra heavy tie rods for minimum deflection.

Product Request Form

If you are human, leave this field blank.

Name *

First

Last *

Last

Email *

Telephone *

Product of Interest *

Message *

reCAPTCHA

Hand Brakes

National offers these hand brakes with a great deal of pride. A simple design, utmost strength with a long life of dependable service. Streamline designed for fast, accurate bending – even for the inexprienced workman. Heavy steel body construction with extra heavy tie rods for perfect alignment. Precision bearings on the apron assures you of a smooth operating brake.

Product Request Form

If you are human, leave this field blank.

Name *

First

Last *

Last

Email *

Telephone *

Product of Interest *

Message *

reCAPTCHA

Power Roll Forming Machine

National’s 3″ and 4″ power rolls are designed for simple operation. Standard with forward and reverse drum switch. Quick release upper roll. Positive chain drive. Heavy duty gear box. Front guard for additional safety. Heavy duty stand is standard.

National’s rolls incorporate three precision turned, ground, and polished high carbon steel rolls. Extra heavy duty and frames with quick release handle on the right front for speedy production forming.

The drive train is powered with a heavy duty precision reduction gear box are housed in a ventilated stand for protection.

Precision roll adjustment is achieved by turning the hand wheel on the left end of the roll. Repeatability is maintained by the forming scale above the hand wheel.

Product Request Form

If you are human, leave this field blank.

Name *

First

Last *

Last

Email *

Telephone *

Product of Interest *

Message *

reCAPTCHA

Front Operated Digital Back Gauge

L.E.D. CONTROL

• Precision digital front operated back gauge
• Control panel located out of the work area, yet convenient for the operator.
• Precision Thomson bearings
• Max travel 30”/762mm
• Precision reliable repeatability improves cutting accuracy.
• Shipped assembled for easy mounting
• Digital readout in increments of one thousandth of an inch
• No memory loss due to power failure
• Easy mounting, can be retrofitted to any National Shear

Squaring Arm

National brings to you a squaring arm constructed of high tensile strength, durable solid cast iron. National’s squaring arm comes with 57” to 60” black oxided scale with 1/16” increments. This squaring arm comes with jack screws for easy leveling. National’s squaring arms are easily assembled on the left side of the machine.

Product Request Form

If you are human, leave this field blank.

Name *

First

Last *

Last

Email *

Telephone *

Product of Interest *

Message *

reCAPTCHA