Shop
Acer 2080 Gap Bed Geared Head Engine Lathe
Acer 2080 GH Engine Lathe
3.06” thru Hole , Gap Bed
16” D1-11 Four Jaw Chuck
Full Length Splash Guard
Halogen Work Light
3.06” Spindle Bore with D1-8 Camlock Spindle Nose
10 HP Single Speed Motor for 440V 3 Phase 60HZ Wiring
18-Spindle Speed: 20-1500 RPM
Hardened and Ground Meehanite Casting Bedway
Hardened and Ground Gears and Spindle
Quick Change Gear Box w/ Direct Selection for Inch/Metric Thread
Built-In Coolant System
Can Be Seen Under Power in our Downtown Louisville, KY. Warehouse
Specifications Subject to Buyer Verification
Description
Acer 20×80 Gap Bed Geared Head Engine Lathe
| Center Height | 10″ |
| Swing Over Bed | 20″ |
| Swing Over Gap | 29.5″ |
| Swing Over Cross Slide | 12″ |
| Distance Between Centers | 80″ |
| Spindle Nose | D1-11 |
| Spindle Bore Diameter | 3-1/16″ |
| Type of Spindle Nose | MT. #8 |
| Taper of Center | MT. #5 |
| Spindle RPM | 20-1500 18 steps |
| Cross Slide Travel | 13.2″ |
| Compound Rest Travel | 8″ |
| Max. Size Cutting Tool | 1″ x 1″ |
| Spindle Diameter | 3″ |
| Spindle Travel | 7″ |
| Tailstock Taper | MT. #5 |
| Bed Length | 127″ |
| Bed Width | 14.96″ |
| Width of Gap | 10″ |
| System | Inch/ Metric |
| Pitch of Leadscrew | Ø 1-1/2″, 4 TPI |
| Metric Pitch Threads | 0.5~7 mm/pitch, 21 kinds |
| Inch Pitch Threads | 4~56 tpi, 14 kinds |
| Range of Longitudinal Feeds | 0.0015″~0.0216″/rev. |
| Range of Cross Feeds | 0.0015″~0.0216″/rev. |
| Main Drive Motor | 10 HP, 4P/8P |
| Coolant Pump Motor | 1/8 HP |
| Floor Dimension | 135.03″ x 57.48″ x 56.69″ |
| Machine Weight | 7260 lbs |
